Inox-Cleaner Cast Iron Sprecial Cleaner


Solves lime, manganese, rust and Ocher

● doesn't harm cast iron
● biodegradable
● limited foaming

The cast iron special cleaner removes and cleans with almost no mechanical handling in a shourt amount of time deposits from pumps and other aggregates.

The cast iron special cleaner dissolves reliably and comletely all kind of carbonates. Lime, manganese, rust and ochers as well as other deposits lose grip and can be flushed off very easily.

The product is foam-limited, highly concentrated and thereby very economical. The contained tensides are, according to WRMG biodegradable.

 

Application
Dilute product 1:3 to 1:5 with water in a dry acid-resistant dip tank (capacity 300-500 l). Pre-clean the disassembled pump parts with high pressure cleaner and put them into an immersion bath. Take them out aber approximately 15 to 20 minutes and flush with water.
With small incrustations the product can be used up to a dilution of 1:10 with water.
For a cleaning of pumps, pipes and with using the bypass method, the product can be applied in a dilution from 1:5 up to 1:10. The time of contact depends on the grade of deposits and is approximately about 20 minutes.
After application the system has to be flushed intensively with water. The used cleaning solution can be neutralized either with water or with ReiCo Neutralin and conducted, under consideration of the legal defaults, with a pH value from 6,5 to 8.5 to the public duct system.